Published Oct 26, 2010



PLUMX
Google Scholar
 
Search GoogleScholar


Oscar Javier Reyes-Ortiz

Fredy Alberto Reyes-Lizcano

Juan Ricardo Troncoso-Rivera

##plugins.themes.bootstrap3.article.details##

Abstract

The aim of the associated research was determining the effect of the contact pressure and the temperature in the rutting of a closed asphalt mixture, with gradation measured between 0-10 mm, with asphalt CA 60/70, compared with the standardized test at 0,9 Mpa and 60ºC. The research starts with the characterization of the granular material and the asphalt, followed by the determination of the optimal percentage of asphalt by means of the Marshall test and ended with the execution of rutting tests, varying the contact pressure from 0,18 Mpa to 0,9 Mpa, in increments of 0,18 Mpa and the temperature from 40ºC to 70ºC, in increments of 10ºC. The results indicate that there is an effect of the contact pressure and the temperature in the permanent deformation; the above mentioned effect is adjusted to an exponential function in both evaluated variables.

Keywords

ensayo Marshall, ahuellamiento, temperatura de ensayo, presión de contacto, mezcla asfálticaMarshall test, rutting, temperature effect, contact pressure, asphalt mixture

References
Aussedat, G. L’essai de fluage dynamique dans la formation des enrobés et le dimensionnement des chaussées, Bitumes et Enrobés bitumineux. Paris: Laboratoire des Ponts et Chaussés, 1977.
Caicedo, B., Caro, S. Modelación del ahuellamiento en mezclas asfálticas. Bogotá: Universidad de los Andes, 2002.
Caro, S., García, C., Caicedo, B. “Modelo numérico para el estudio del clima en pavimentos flexibles”. XIII Simposio Colombiano sobre Ingeniería de Pavimentos. Bogotá: Universidad de los Andes, 2001.
Colombia. Invías. Norma I.N.V.E.–756. Resistencia a la deformación plástica de mezclas asfálticas mediante la pista de ensayo de laboratorio. Bogotá: Invías, 1998.
Colombia. Invías. Norma I.N.V.E.–748. Resistencia de mezclas bituminosas empleando el aparato Marshall. Bogotá: Invías, 1998.
Reyes, F.A. Diseño racional de pavimentos. Bogotá: CEJA-ECI, 2003.
Reyes, O.J., Reyes, F.A., Incidencia en las propiedades del asfalto y de una mezcla asfáltica MDC-1 al adicionar SBR. XV Simposio de Ingeniería de Pavimentos. Melgar, 2005.
Thenoux Z.G. et al. Análisis de casos de ahuellamiento en mezclas asfálticas chilenas. Santiago: Departamento de Ingeniería y Gestión de la Construcción, Pontificia Universidad Católica de Chile, s.f.
Uniandes, Instituto de Desarrollo Urbano (IDU). Reglamento técnico vial para la ejecución de obras en el sector vial de Bogotá, D.C. Bogotá: Uniandes – IDU, 2002.
How to Cite
Reyes-Ortiz, O. J., Reyes-Lizcano, F. A., & Troncoso-Rivera, J. R. (2010). Efecto de la presión de contacto y la temperatura en el ahuellamiento de una mezcla asfáltica. Ingenieria Y Universidad, 10(1). Retrieved from https://revistas.javeriana.edu.co/index.php/iyu/article/view/908
Section
Articles

Most read articles by the same author(s)