Published Oct 30, 2012



PLUMX
Almetrics
 
Dimensions
 

Google Scholar
 
Search GoogleScholar


Hermes Ariel Vacca-Gámez, MSc

María Patricia León-Neira, MSc

Daniel Mauricio Ruiz-Valencia, MSc

##plugins.themes.bootstrap3.article.details##

Abstract

In this article we present the results oflaboratory tests to evaluate the effectof the aged asphalt (short term) onthe static and dynamic performanceof asphalt mixtures type MDC-2. Thisaging is the one that occurs during theprocesses of production and constructionof the asphalt mixture. The 80-100 asphalt was aged by the RollingThin Film Oven test (RTFO); thespecimens of asphalt mixtures weremade to determine their mechanicalproperties with static and dynamictests. Mixtures made with originaland aged asphalt were tested. In agreementwith the results of the tests, thestatic behavior of both mixtures (originaland aged) is different. The stabilityof the mixture with aged asphalt hadan increase of 18% compared with theincrease in the original asphalt. Thedynamic behaviour of the two mixtureswas different for the dynamic axialmodulus tests (differences of 10,5%)and for the indirect tension resilientmodulus test (differences of 21%) forthe same frequency and temperatura.In the test of permanent deformationof the asphalt mixture to repetitiveaxial loading the mixture made withaged asphalt had a lower permanentdeformation (34%) compared withthe original mixture. The results ofthe fatigue tests for both mixtureswere similar.

Keywords

Aged asphalt (RTFO), asphalt mixtures, static and dynamic laboratory testsAsfalto envejecido (RTFO), mezclas asfálticas, ensayos dinámicos y estáticos de laboratorio

References
AIREY, G. State of the art report on Ageing test methods for bituminous pavement Materials . The international Journal of Pavement Engineering. 2003, vol. 4, núm. 3 pp. 165-176.
BSI (National Standards Body of the UK). BS EN 12697-24:2004. Bituminous mixtures. Test methods for hot mix asphalt. Fatigue. Londres: BSI, 2004.
BSI (National Standards Body of the UK). BS EN12697 A. Uniaxial ciclic compresion test. Londres: BSI, 2004.
HUSAIN, U. y ANDERSON, D. The pressure Aging Vessel PAV: A test to simulate rheological changes due to field aging. American Society of testing Materials, 1994.
HVEEM, F. N.; ZUBE, E. y KOG, J.S Proposed new test and specifications for paving grade asphalt. Journal of Association of Asphalt Paving Technologist. 1963, vol. 32, pp. 271-327.
INVÍAS-Instituto Nacional de Vías. Normas de ensayos de materiales para carreteras. Bogotá: Invías, 2007, vols. 1 y 2.
MALLICK, R. y BROWN, E. An evaluation of superpave binder aging methods. The international Journal of Pavement Engineering. 2004, vol. 5, núm. 1, pp 9-18.
MONTEPARA, A. y GIULIANI, F. Comparison between ageing simulation test of road bitumen. Proc. 2nd Eurasphalt and Eurobitume Congrees. Session 1: Performance Teting and Specifications for Binder and Mixtures. Barcelona, 2000. pp. 398-405.
TAVERA, A. Manual de instalación, operación, mantenimiento y montaje de los ensayos para el equipo NAT. Bogotá: Pontificia Universidad Javeriana, 2002.
How to Cite
Vacca-Gámez, H. A., León-Neira, M. P., & Ruiz-Valencia, D. M. (2012). Evaluation of the rolling thin film oven aging of the 80-100 asphalt cement in the static and dynamic behavior of asphalt mixtures. Ingenieria Y Universidad, 16(2), 379. https://doi.org/10.11144/Javeriana.iyu16-2.ertf
Section
Articles

Most read articles by the same author(s)