Influence of temperature, granulation, and water in the cohesion of asphalt mixtures
##plugins.themes.bootstrap3.article.details##
This research studies the influence of temperature, water, and granulometry in the cohesion of asphalt mixtures. The study was carried out by subjecting dry and wet samples to the UCL test. The research started by characterizing the granular material and three asphalts with different behaviour (60/70, 85/100 and modified with polymer SBS). The grain size curves used correspond to the so established as md10 and md12 by the Instituto de Desarrollo Urbano (IDU). The asphalt optimal percentage was determined via the Marshall apparatus in simples without filler, following UCL test procedures. Several samples were built with the optimal percentage and tested by means of an Angeles Machine at different typical Colombian temperaturas in dry and wet state. The results obtained show that the modified asphalt presents a higher cohesion rate than conventional asphalts; that water diminishes the cohesion between the asphalt and the particles irrespective of the granule used, and that the md12 granulometry yield higher losses tan the md10 grain size.
Asphalt mixtures-effect of temperature, granulometry, cohesionMezclas de asfalto-efecto de la temperatura, granulometría, cohesión
—. Performance grades asphalt binder specification and testing: series 1 (SP-1). Lexington, 1996.
BIANCHETTO, H.; MIRÓ, R. y PÉREZ, J. F. Resistencia al envejecimiento de las mezclas bituminosas en caliente: beneficios y limitaciones de la incorporación de fílleres comerciales. Primera parte: estudios en base al método UCL. Revista Infraestructura Vial, 2007, núm.17, pp. 13-24.
INSTITUTO DE DESARROLLO URBANO (IDU). Especificaciones técnicas generales de materiales y construcción para proyectos de infraestructura vial y de espacio público en Bogotá. Bogotá, 2005.
KENNEDY, T. et al. Superior performing asphalt pavement (superpave): the product of the SHRP asphalt research program. Washington: SHRP, 1994.
MIRÓ RECASENS, R. Metodología para la caracterización de ligantes asfálticos mediante el empleo del ensayo cántabro. Cataluña: Universidad Politécnica de Catalunya-Departamento de ITT, 1994.
MIRÓ, R.; MARTÍNEZ, A. y PÉREZ, F. Evaluation of effect of heat-adhesive emulsions for tack coats using shear test from Laboratorio de Caminos de Barcelona. Transportation Research Record: Journal of the Transportation Research Board, 2006, núm. 1970, pp. 64-70.
PÉREZ, F.; MIRÓ, R. y MARTÍNEZ, A. Caracterización de los ligantes bituminosos a partir de su tenacidad y energía de rotura. XIII Congreso Ibero-Americano del Asfalto, San José de Costa Rica, Lanamme, 2005, pp. 1-18.
PEREZ, F. et al. Nuevos ensayos para la caracterización de ligantes y mezclas asfálticas. Carreteras, 2002, núm. 122, pp. 24-35.