Publicado sep 1, 2005



PLUMX
Google Scholar
 
Search GoogleScholar


Sandra Giselle Araque Beltrán

Andrea Marcela Caballero Beltrán

Andrea Marcela Caballero Beltrán

Luis Eduardo Luna Angel

Luis Eduardo Luna Angel

##plugins.themes.bootstrap3.article.details##

Resumen

ANTECEDENTES: la dentina es el eje estructural del diente y constituye el tejido mineralizado que conforma el mayor volumen de la estructura dentaria; en ella se pueden distinguir dos componentes básicos: la matriz mineralizada y los túbulos dentinarios que la atraviezan en todo su espesor. Teniendo en cuenta que los túbulos están conectados por el material orgánico, el cual tiene más bajo módulo de elasticidad que los túbulos a lo largo de sus ejes, y que la dentina es un tejido que por ser tan amplio en su composición, tiene un comportamiento biomecánico especial, diferentes autores han planteado que éste es un tejido anisotrópico a diferencia de otros, quienes proponen que se comporta isotrópicamente. OBJETIVO: Cómo resultlado de ésta controversida, el motivo fundamental para la realización de ésta investigación fué observar por medio de elementos finitos, el comportamiento biomecánico en un modelo ideal de dentina, teniendo en cuenta su composición y describir cómo se distribuye el esfuerzo dentro de ella al aplicar cargas compresivas en diferentes direcciones con respecto a los túbulos. METODO: se utilizó el programa ALGOR para diseñar el modelo tridimensional. Las fuerzas fueron aplicadas paralelas y perpendiculares a los túbulos dentinales. El análisis de la información se llevó a cabo. RESULTADOS: al aplicar las cargas, el modelo ideal de dentina, se comportó ortotrópicamente, debido a que presenta diferentes propiedades elásticas en los diferentes planos y las propiedades son independientes de la dirección en cada plano, se encontró que la mayor concentración de esfuerzo al aplicar las cargas tanto paralelas como perpendiculares fué en dentina peritubular y la mayor defomración se presentó en líquido tubular.

BACKGROUND: dentine is the structural axis of teeth and the mineralized tissue that constitutes the largest part of the teeth structure. It has two basic components; the mineralized matrix and the tubules that go through it. Since tubules are connected by organic material, which is less elastic than tubules along their axis, and since dentine exhibits a special biomechanical behavior due to its wide composition. some authors have argued that dentine is a non-isotropic tissue while other sustain that it is isotropic. OBJECTIVE:as a result of this controversy, the basic reason for this research was to analyze with finits elements the biomechanical behavior of a dentine ideal model, keeping on mind its composition, and to describe how stress is distributed when applying compressive charges in different directions with respect to tubules. METHOD: the ALGOR programwas used todesign the three dimensional model. The stress applied was parallel and perpendicular to dentine tubules. Information was analyzed by observing stress concentrations through a qualitative analysis. RESULTS: when applying charges, the dentine ideal model behaved orthotropically due to the fact that it has different elastic properties in different plane and the properties are no dependant on the direction in each plane. It was found that the biggest effort  concentrated when applying parallel and perpendicular charges was in peritubular dentine, and that the biggest deformation was in tubular liquid.

Keywords
References
1. Gómez M, Campos A. Histología y embriología bucodental, 3ª ed., Colombia: Médica Panamericana, 1999; 197-222.

2. Lertchirakarn V, Palamara J, Messer H. Anisotropy of tensile strength of root dentin. J Dent Res 2001 Nov; 80(2): 453-612.

3. Pashley D, DMD, PhD. Clinical correlations of dentin structure and function. J Prosthet Dent 1991 Dec; 66: 771- 81.

4. Marshall G. Dentin: microestructure and characterization. Quintessence Int 1993; 24 (9): 606-19.

5. Marshall G, Marshall S, Kinney J, Balooch M. The dentin substrate: structure and properties related to bonding. J Dent 1997 Mar; 25(6): 441-58.

6. Vijay K, PhD, Khera S, BDS, DDS, MS, Singh K. Clinical implications of the response of enamel and dentin to masticatory loads. J Prosthet Dent 1990; 64: 446-54.

7. Caputo A, Standlee J. Biomechanics in clinical dentistry, 1a ed., Chicago: Quintessence Books, 1987; 102.

8. Chen W. The civil engineering handbook. 1a ed., Indiana: CRC Press, 1995; 772.

9. Spears I, Noort V, Cromptom R, Cardew G, Howard I. The effects of enamel anisotropy on the Distribution of Stress in a Tooth. J Dent Res 1993 Nov; 11(72): 1526-31.

10. Xu H, Smith D, Jahanmir S, Romberg E, Kelly J, Thompson V, Rekow E. Indentation damage and mechanical properties of human enamel and dentin. J Dent Res 1998 Mar; 77(3): 472-80

11. Varón A, Mejía E, Ruiz V. Elementos finitos. Una herra- mienta de análisis conceptual para los profesionales del área odontológica. Odontos 2002 Oct; 7: 6-16.

12. Lázaro R. Aplicación del método de los elementos finitos al cálculo de las fuerzas. Quitessence 1999; 2-3.

13. Hernández R. Metodología de la investigación, 1ª ed., Chile: McGraw-Hill, 1991; 36.

14. Kinney J, Balooch M, Marshall G, Marshall S. A Micromechanics model of the elastic properties of human dentine. Arch Oral Biol 1999 May; 44: 813-22.

15. Nakabayashi N. Hybridization of dental hard tissues, 2a ed., Japan: Quintessence Books, 1998; 21-26, 29-35.

16. Brannstrom M. Dentin and pulp in restaurative dentistry. Wolfe Medical Publications, 1981; 12.

17. Manns A, Díaz G. Sistema estomatognático, 2ª ed., Chile: Sociedad Oláfica Almagro, 1988; 77-8.

18. Kinney J, Balooch M, Marshall S, Marshall G, Weihs T. Hardness and youngs modulus of human peritubular and intertubular dentine. Arch Oral Biol 1995 Sep; 41(1): 9-13.

19. Watanabe L. Marshall G, Marshall S. Dentin shear strength: effects of tubule orientation and intratooth location. Dent Matter 1996 Mar; 12: 109-15.

20. Lacouture P, Luna LE. Relación de la anisotropía con la resistencia del esmalte. Univ Odontol 2002; 22(48): 52-9.
Cómo citar
Araque Beltrán, S. G., Caballero Beltrán, A. M., Caballero Beltrán, A. M., Luna Angel, L. E., & Luna Angel, L. E. (2005). Comportamiento biomecánico en un modelo ideal de dentina ante cargas compresivas analizado por el método de elementos finitos/Biomechanical behavior of a dentin ideal model when bearing compressive charges as analyzed by the finite element model. Universitas Odontologica, 25(56), 12–18. Recuperado a partir de https://revistas.javeriana.edu.co/index.php/revUnivOdontologica/article/view/9297
Sección
Práctica Clínica